• Concentrations and course offerings may vary by campus and/or by program modality.  Please consult with your advisor or admissions coach for the course availability each term at your campus or within your program modality. 
  • Certain options within the program may be required at certain campuses or for certain program modalities.  Please consult with your advisor or admissions coach for requirements at your campus or for your program modality. 

Complete all courses listed below unless otherwise indicated. Also complete any corequisite labs, recitations, clinicals, or tools courses where specified and complete any additional courses needed beyond specific college and major requirements to satisfy graduation credit requirements.

Universitywide Requirements

All undergraduate students are required to complete the Universitywide Requirements.

NUpath Requirements

All undergraduate students are required to complete the NUpath Requirements.

NUpath requirements Interpreting Culture (IC), Understanding Societies and Institutions (SI), Engaging Differences and Diversity (DD), and Integrating Knowledge and Skills Through Experience (EX) are not explicitly satisfied by required engineering coursework. Successful completion of a cooperative education experience may fulfill the EX requirement. Students are responsible for satisfying unfulfilled NUpath requirements with general elective coursework.  

Engineering Requirements

Required Engineering
ME 2340
and ME 2341
Introduction to Material Science
and Lab for ME 2340
5
ME 2350Statics4
ME 2355
and ME 2356
Mechanics of Materials
and Lab for ME 2355
5
ME 2380
and ME 2381
Thermodynamics
and Recitation for ME 2380
4
ME 3455
and ME 3456
Dynamics
and Lab for ME 3455
5
ME 3475Fluid Mechanics4
ME 4505
and ME 4506
Measurement and Analysis with Thermal Science Application
and Lab for ME 4505
5
Senior Capstone Design Project
MEIE 4701Capstone Design 11
MEIE 4702Capstone Design 25
Upper Mechanical Electives
Complete two of the following (at least one must be ME 4550 or ME 4570):8
Mechanical Engineering Computation and Design
Introduction to Computational Fluid Dynamics
Mechanical Engineering Design
System Analysis and Control
Thermal Systems Analysis and Design
Supplemental Credit
2 semester hours from the following count toward the engineering requirement:2
Cornerstone of Engineering 1 1
3 semester hours from the following count toward the engineering requirement:3
Cornerstone of Engineering 2 1

Computer Science Requirements

Computer Science Fundamental Courses
CS 1800
and CS 1802
Discrete Structures
and Seminar for CS 1800
5
CS 2500
and CS 2501
Fundamentals of Computer Science 1
and Lab for CS 2500
5
CS 2510
and CS 2511
Fundamentals of Computer Science 2
and Lab for CS 2510
5
Computer Science Required Courses
CS 3000Algorithms and Data4
CS 3500
and CS 3501
Object-Oriented Design
and Lab for CS 3500
5
CS 3650Computer Systems4
CS 4500Software Development4
or CS 4530 Fundamentals of Software Engineering
CS 4700Network Fundamentals4
or CS 4730 Distributed Systems
Khoury Elective Courses
Students should plan to take a NUpath capstone using designated courses in either a concentration, computer science electives, or as a general elective.
With advisor approval, directed study, research, project study, and appropriate graduate-level courses may also be taken as upper-division electives.
Complete 4 semester hours of CS, CY, DS, or IS classes that are not already required. Choose courses within the following ranges: 4
CS 2500 or higher, except CS 5010
CY 2000 or higher
DS 2500 or higher, except DS 4900
IS 2000 or higher, except IS 4900

Supporting Courses: Mathematics/Science

Complete all mathematics/science courses with a minimum of 30 semester hours.

Required Mathematics/Science
CHEM 1151
and CHEM 1153
General Chemistry for Engineers
and Recitation for CHEM 1151
4
MATH 1341Calculus 1 for Science and Engineering4
MATH 1342Calculus 2 for Science and Engineering4
MATH 2321Calculus 3 for Science and Engineering4
MATH 2341Differential Equations and Linear Algebra for Engineering4
PHYS 1151
and PHYS 1152
and PHYS 1153
Physics for Engineering 1
and Lab for PHYS 1151
and Interactive Learning Seminar for PHYS 1151
5
PHYS 1155
and PHYS 1156
and PHYS 1157
Physics for Engineering 2
and Lab for PHYS 1155
and Interactive Learning Seminar for PHYS 1155
5
Supplemental Credit
1 semester hour from the following counts toward the mathematics/science requirement:1
Cornerstone of Engineering 1 1

Professional Development

Professional Development
ENCP 2000Introduction to Engineering Co-op Education1
ENCP 3000Professional Issues in Engineering1
GE 1000First-Year Seminar1
Additional Required Courses
1 semester hour from the following counts toward the professional development requirement:1
Cornerstone of Engineering 1 1
1 semester hour from the following counts toward the professional development requirement:1
Cornerstone of Engineering 2 1

Writing Requirements

A grade of C or higher is required in each course:
ENGW 1111First-Year Writing4
ENGW 3302Advanced Writing in the Technical Professions4
or ENGW 3315 Interdisciplinary Advanced Writing in the Disciplines

Required General Electives

Complete 8 semester hours of academic, nonremedial, nonrepetitive courses. Recommend selecting courses to fulfill NUpath DD, SI, and IC.8

Integrative Courses

This course is already required above and also fulfills the integrative requirement:
Capstone Design 2

Major GPA Requirement

2.000 minimum GPA required in IE, ME and MEIE courses

Khoury College GPA Requirement

Minimum cumulative 2.000 GPA required in all CS, CY, DS, and IS courses

Program Requirement

143 total semester hours required

1

Students can substitute Engineering Design (GE 1110) and Engineering Problem Solving and Computation (GE 1111) for Cornerstone of Engineering 1 (GE 1501) and Cornerstone of Engineering 2 (GE 1502) .

 

Sample Plans of Study

Four Years, Two Co-ops in Summer 2/Fall

Year 1
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CHEM 1151
and CHEM 1153
4CS 2500
and CS 2501
5MATH 23214General elective4
ENGW 11114GE 15024ME 23504General elective4
GE 10001MATH 13424  
GE 15014PHYS 1151
and PHYS 1152
and PHYS 1153
5  
MATH 13414   
 17 18 8 8
Year 2
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 2510
and CS 2511
5CS 1800
and CS 1802
5CS 30004Co-op
MATH 23414CS 3500
and CS 3501
5ME 34754 
ME 2380
and ME 2381
4CS 36504  
PHYS 1155
and PHYS 1156
and PHYS 1157
5ENCP 20001  
 ME 2355
and ME 2356
5  
 18 20 8 0
Year 3
FallHoursSpringHoursSummer 1HoursSummer 2Hours
Co-opCS 4500 or 45304MEIE 47011Co-op
 CS 4700 or 47304Khoury elective4 
 ME 2340
and ME 2341
5Upper mechanical elective4 
 ME 3455
and ME 3456
5  
 0 18 9 0
Year 4
FallHoursSpringHours  
Co-opENCP 30001  
 ENGW 3302 or 33154  
 ME 4505
and ME 4506
5  
 MEIE 47025  
 Upper mechanical elective4  
 0 19  
Total Hours: 143

Four Years, Two Co-ops in Spring/Summer 1

Year 1
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CHEM 1151
and CHEM 1153
4CS 2500
and CS 2501
5ME 23504General elective4
ENGW 11114GE 15024MATH 23214General elective4
GE 10001MATH 13424  
GE 15014PHYS 1151
and PHYS 1152
and PHYS 1153
5  
MATH 13414   
 17 18 8 8
Year 2
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 2510
and CS 2511
5Co-opCo-opENGW 33024
ENCP 20001  ME 34754
ME 2380
and ME 2381
4   
MATH 23414   
PHYS 1155
and PHYS 1156
and PHYS 1157
5   
 19 0 0 8
Year 3
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 1800
and CS 1802
5Co-opCo-opMEIE 47011
CS 3500
and CS 3501
5  Upper mechanical elective4
CS 36504  Khoury elective4
ME 2355
and ME 2356
5   
 19 0 0 9
Year 4
FallHoursSpringHours  
CS 30004CS 4500 or 45304  
CS 4700 or 47304ENCP 30001  
ME 2340
and ME 2341
5ME 4505
and ME 4506
5  
ME 3455
and ME 3456
5MEIE 47025  
 Upper mechanical elective4  
 18 19  
Total Hours: 143

Five Years, Three Co-ops in Summer 2/Fall

Year 1
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CHEM 1151
and CHEM 1153
4CS 1800
and CS 1802
5VacationVacation
ENGW 11114GE 15024  
GE 10001MATH 13424  
GE 15014PHYS 1151
and PHYS 1152
and PHYS 1153
5  
MATH 13414   
 17 18 0 0
Year 2
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 2500
and CS 2501
5CS 2510
and CS 2511
5VacationCo-op
MATH 23214ENCP 20001  
ME 23504MATH 23414  
PHYS 1155
and PHYS 1156
and PHYS 1157
5ME 2355
and ME 2356
5  
 ME 2380
and ME 2381
4  
 18 19 0 0
Year 3
FallHoursSpringHoursSummer 1HoursSummer 2Hours
Co-opCS 3500
and CS 3501
5CS 30004Co-op
 CS 36504ME 34754 
 ME 2340
and ME 2341
5  
 ME 3455
and ME 3456
5  
 0 19 8 0
Year 4
FallHoursSpringHoursSummer 1HoursSummer 2Hours
Co-opCS 4500 or 45304MEIE 47011Co-op
 ENCP 30001Upper mechanical elective4 
 ENGW 3302 or 33154General elective4 
 ME 4505
and ME 4506
5  
 Upper mechanical elective4  
 0 18 9 0
Year 5
FallHoursSpringHours  
Co-opCS 4700 or 47304  
 MEIE 47025  
 General elective4  
 Khoury elective4  
 0 17  
Total Hours: 143

Five Years, Three Co-ops in Spring/Summer 1

Year 1
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CHEM 1151
and CHEM 1153
4CS 1800
and CS 1802
5VacationVacation
ENGW 11114GE 15024  
GE 15014MATH 13424  
GE 10001PHYS 1151
and PHYS 1152
and PHYS 1153
5  
MATH 13414   
 17 18 0 0
Year 2
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 2500
and CS 2501
5Co-opCo-opVacation
ENCP 20001   
ME 23504   
MATH 23214   
PHYS 1155
and PHYS 1156
and PHYS 1157
5   
 19 0 0 0
Year 3
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 2510
and CS 2511
5Co-opCo-opME 34754
MATH 23414  General elective4
ME 2380
and ME 2381
4   
ME 2355
and ME 2356
5   
 18 0 0 8
Year 4
FallHoursSpringHoursSummer 1HoursSummer 2Hours
CS 30004Co-opCo-opMEIE 47011
CS 3500
and CS 3501
5  Khoury elective4
CS 36504  Upper mechanical elective4
ME 3455
and ME 3456
5   
 18 0 0 9
Year 5
FallHoursSpringHours  
ME 2340
and ME 2341
5ENCP 30001  
MEIE 47025ENGW 3302 or 33154  
CS 4500 or 45304ME 4505
and ME 4506
5  
CS 4700 or 47304General elective4  
 Upper mechanical elective4  
 18 18  
Total Hours: 143